• autoclave shredder,medical waste management
  • autoclave shredder,medical waste management
  • autoclave shredder,medical waste management
  • autoclave shredder,medical waste management

WRAS75 75L Integrated Autoclave Shredder For Medical Waste Management

The equipment combines sterilization and shredding functions in one, first of all, after the waste reaches a sterile state, the sterilized waste is manually sent into the shredding chamber. Basically the whole process is automatic, the total cycle time can be as fast as 35 to 50 minutes, and up to 75L of medical waste can be processed.

  • Product Description
  • Technical Parameters
  • Video

75L Integrated Autoclave Shredder For Medical Waste Management Description:

WRAS75 Integrated autoclave shredder is mainly used for medical waste,such as medicine bottles, infusion tubes and needles, syringes, disposable gloves, cotton gauze, etc.Designed for on-site treatment of medical waste generated in clinics, hospital departments and other places.It is designed to effectively reduce the volume of medical waste by 60%, greatly reducing the cost of medical waste storage space for medical waste, while also reducing transportation costs. The machine has miniaturization, low noise, simple operation, safe and reliable, etc.

 

And the crushing and recycling of some pathological wastes to prevent them from being recycled by criminals.Basically, the entire process is automatic except for manually taking the sterilized waste from sterilizer to the shredder, depending on the capacity, the total cycle time can be as fast as 35~50 minutes, with up to 75 Liter of medical waste can be processed.

autoclave shredder,medical waste management

Integrated Autoclave Shredder For Medical Waste Management Features:

◆4-shaft shredder: special design for medical waste treatment, easy to shredder big medical waste and with small output sizes.

◆Safety: sterilization prior to Shredding to avoid operator directly contact with waste.

◆Microbial Inactivation: 99.99%

◆Low noise—not exceeding 70 db during operation and will not cause noise pollution to the environment;

◆Not easy to jam—large torque during rotation, not easy to jam, even if jamming occurs, the machine will detect and reverse it by itself, and then revert it again for waste shredding and treatment;

◆Reliable—A safety switch is installed in the dangerous place. When the feeding port cover or When the safety door is opened, the machine will automatically stop running. The maximum ensure operator safety to the maximum extent possible;

◆Easy to operate—with touch display for sterilizer and shredder, easy to operate and only requires simple training to operate normally.

autoclave shredder,medical waste management

Leave a Reply

Your email address will not be published. Required fields are marked *

Model WRAS75
Medical waste four shaft shredder Medical waste sterilizer
Motor Power

 

6KW Heating Power 3.8KW
Working Voltage

 

380V/50Hz/3 Phase or Customized Working Voltage

 

220V/50Hz/1 Phase or Customized

 

Chamber Size

 

550*400*260 mm Sterilization Temperature +105-134℃ adjustable

 

Rotor-Knives Diameter

 

Φ170mm

 

Heat Preservation time 1-999 min

 

Rotor-Knives Thickness

 

15mm

 

Safe temperature control Set temperature + 2 ℃(stop heating, sound prompt)
Shaft Speed

 

14 RPM Chamber Size

 

Ø 388 x 670 mm

 

Rotor-knives Number

 

44Pcs

 

Chamber Volume

 

75L
Suggest Material Feeding Size

 

250×250 mm

 

Over pressure release pressure

 

≤ 0.23 Mpa

 

Auto Reverse To Clear The Jammed Material

 

Yes

 

Microbial Inactivation

 

99.99%

 

Output Flakes Size < 20 mm

 

Process

 

Sterilization prior to Shredding

 

Control system Touch display Control system Touch display
Whole Machine
Machine Size 1670 x 960 x 1560 mm

 

Weight 1500kg