8 Treasure Congee/Coconut Milk Sterilization Description:

The sterilization principle of AutoClave Sterilizer is to inject sterilization of 121 ° C in the hot tank into the sterilization cabinet, completely accept all foods, pure steam (vapor pressure 0.4-0.6 MPa), while softening water is constantly cycling. Water Spray Retort directly heats water (supplementally compressed when necessary), rapidly temperature rise (25 ° C in the initial temperature, 8-15 minutes to reach 121 ° C), and ensure that it is guaranteed. Normal temperature sterilization, no bag phenomenon. You can produce quality products in the shortest possible time.

AutoClave Retort Sterilizer uses pure water directly to heat, indirect cooling. The soft multi-stage bactericidal process is intuitive and controllable, fast temperature rise, fast cooling, ensuring that the product reaches a predetermined bactericidal effect in the shortest possible time.
Vacuum is used for the entire processing cycle. The autoclave retort sterilizer can be automatically adjusted by automatic adjustment valves according to process requirements.

Coconut Milk Sterilization Application:
The Canned Food AutoClave can not only be used in various drinks, food sterilization, but also for high viscosity, large-capacity products. For example: Eight Puring porridge, meat sauce, meat, fish canned, rice and other products.

Canned Food Autoclave Water Spray Retort Sterilizer Features:
Accurate temperature control
A wide range of temperature controls, 80-126°C, can be heated according to product and process formulations to maximize repeatability and stability between product batches.
Suitable for a variety of packaging forms
The computer is used to monitor the whole process, and various parameters can be modified to adapt to the change of internal pressure of product packaging, so that the deformation degree of product packaging is minimized. It can easily meet the pressure of tin cans, aluminum cans or plastic bottles, plastic boxes or flexible containers without the influence of hard containers.

Highly clean product packaging
Heat exchangers are used for indirect heating and cooling to keep steam and cooling water out of contact with process water. The impurities in the steam and cooling water will not be brought into the sterilization tank, avoiding secondary pollution of the product, without the need for water treatment agents (without adding chlorine), and the service life of the heat exchanger is greatly extended.
Optional Remote Monitoring System

Leave a Reply