• pharmaceutical sterilization equipment,coconut processing equipment
  • pharmaceutical sterilization equipment,coconut processing equipment
  • pharmaceutical sterilization equipment,coconut processing equipment
  • pharmaceutical sterilization equipment,coconut processing equipment

YG Coconut Processing Pharmaceutical Sterilization Equipment

Coconuts are rich in nutrients, prone to bacteria, and highly susceptible to spoilage, limiting their prospects for industrialization in the food industry. The existing sterilization process will destroy the flavor of coconut itself, reduce the transparency of coconut water and affect its appearance. These factors restrict the production and preservation process of coconut food, affect the shelf life of the product, and are not conducive to market promotion.

  • Product Description
  • Technical Parameters
  • Video

Coconut Processing Pharmaceutical Sterilization Equipment Description:

The sterilizer is a sterilizing device of coconut. It can sterilize coconut at high temperature and kill most of microorganism. After sterilization, it can be used for the next peeling and shucking processing to produce various coconut product. In the sterilization process of autoclave steam sterilizer, it has succeeded in maintaining rich coconut flavor and mellow taste.

The autoclave is mainly used to produce all kinds of coconut water, coconut milk, coconut juice, coconut powder, coconut oil and so on. Coconuts have more uses than you might think. Besides being edible, coconut oil can also be used to make soap and other toiletries. Coconut fiber can be used to weave MATS, sacks and other daily necessities. The leaves and trunk of the coconut are also a traditional building material.


pharmaceutical sterilization equipment,coconut processing equipment


Coconut Pharmaceutical Sterilization Equipment Features:

The autoclave vacuum pump conducts 3/4 times of pre-vacuum in the beginning of the cycle to remove the chamber air more than 99%, so that the chamber steam could have good penetration, and temperature more even by this way.


Sealing Door
1. Door panel material: 316L(304) stainless steel, inner surface precision polishing treatment.
2. Safety interlock: the door is not sealed, and the steam is not allowed into the chamber; when there is pressure in the chamber,not allowed to open the door; Fully comply with the pressure vessel safety interlock standard.



Pipeline System
1. Stainless steel pipes without dead angle, ensuring complete drainage.
2. High quality pneumatic valve.
3. Filter: The autoclave is accessorized with high efficiency antibacterial air filter with oylet less than 0.22 micrometers protected by a check valve, which could avoid secondary pollution, and it could be optionally equipped with SIP function.
4. Validation port: Validation port is equipped on the side of the autoclave for the insert of the validation probes for the GMP validation.
5. Temperature control: Both movable and fixed sensor is installed on the autoclave.
6. Optionally accessorized with built-in steam generator.

pharmaceutical sterilization equipment,coconut processing equipment


1. PLC and HMI from SIMENS
2. Automatic & Manual Operation Mode;
3. Stable performance & precise control;
4. Multiple sterilize cycles;
5. Sterilizing parameters can be set on HMI;
6. Print of time, temperature, pressure and etc.
7. Display the real-time data and curve and valve status.


Leave a Reply

Your email address will not be published. Required fields are marked *

Design pressure Working Pressure Design Temperature Working Temperature Heat Equilibrium Vacuum Steam Source Pressure Water Source Pressure Compressed Air Pressure
0.245Mpa 0.22Mpa 139℃ 134℃ ≤±1℃ -0.095Mpa 0.4-0.6Mpa 0.2-0.3Mpa 0.6-0.8Mpa
Specifications Overall Dimensions Chamber Size Steam Consumption Power Water Consmption Net Weight
Model L*M*H(mm) L*W*H(mm) (kg/cycle) (KW) (kg/cycle) (kg)
Single/Double Door
YG-0.1 825*1080*1600 630*400*480 15 1 80 380
YG-0.25 895*1220*1720 760*600*600 20 1.5 150 650
YG-0.36 1195*1220*1720 1000*600*600 25 1.5 150 760
YG-0.6 1245*1300*1880 1050*680*850 30 2 200 1100
YG-0.8 1595*1300*1880 1400*680*850 35 3 250 1300
YG-1.2 1695*1370*1960 1500*750*1100 40 3 300 1900
YG-2.5 3195*1370*1960 3000*750*1100 75 4.5 450 2800
YG-5.0 3635*1800*2200 3400*1000*1500 150 7.5 600 4500