Coconut Food Sterilizer Autoclave Coconut Processing Equipment Description:
There is no oxidation in the fresh coconut, which is naturally the cleanest and most refreshing, but to make it into a shelf-ready packaged coconut product, there are inevitably losses in the processing process. Food sterilizer is a sterilizing device of coconut. It can sterilize coconut at high temperature and kill most of microorganism. After sterilization, it can be used for the next peeling and shucking processing to produce various coconut food. In the sterilization process of autoclave steam sterilizer, it has succeeded in maintaining rich coconut flavor and mellow taste. The major equipment of The Company is made of high-quality food-grade stainless steel, which meets the hygiene requirements of food processing.

Coconut Processing equipment (COCONUT Processing Equipment) is a sterilization process for coconut. The steps include three times of pre-vacuum before sterilization, using steam to raise the temperature in the cabinet to 134℃. The steam water will not pollute the product. Precise temperature and pressure control can be applied to a variety of sterilization processes.
Autoclave food processing is mainly used to produce all kinds of coconut water, coconut milk, coconut juice, coconut powder and so on.
Coconuts have more uses than you might think. Besides being edible, coconut oil can also be used to make soap and other toiletries. Coconut fiber can be used to weave MATS, sacks and other daily necessities. The leaves and trunk of the coconut are also a traditional building material.

Coconut Food Sterilizer Autoclave Coconut Processing Equipment Features:
Sealing door
1. Door panel material: 316L(304) stainless steel, inner surface precision polishing treatment.
2. Safety interlock: the door is not sealed, and the steam is not allowed into the chamber; when there is pressure in the chamber,not allowed to open the door; Fully comply with the pressure vessel safety interlock standard.

Pipeline system
1. Stainless steel pipes without dead angle, ensuring complete drainage.
2. High quality pneumatic valve.
3. Filter: The autoclave is accessorized with high efficiency antibacterial air filter with oylet less than 0.22 micrometers protected by a check valve, which could avoid secondary pollution, and it could be optionally equipped with SIP function.
4. Validation port: Validation port is equipped on the side of the autoclave for the insert of the validation probes for the GMP validation.
5. Temperature control: Both movable and fixed sensor is installed on the autoclave.
6. Optionally accessorized with built-in steam generator;

Control
1. PLC and HMI from SIMENS
2. Automatic & Manual Operation Mode;
3. Stable performance & precise control;
4. Multiple sterilize cycles;
5. Sterilizing parameters can be set on HMI;
6. Print of time, temperature, pressure and etc.
7. Display the real-time data and curve and valve status.

PRE VACUUM CYCLE
The autoclave vacuum pump conducts 3/4 times of pre-vacuum in the beginning of the cycle to remove the chamber air more than 99%, so that the chamber steam could have good penetration, and temperature more even by this way.

Leave a Reply