Dental Waste Disposal Autoclave With Shredder Waste Treatment System Description:

The all-in-one autoclave with shredder can be used in dentistry, ophthalmology, surgery and laboratories.
Firstly, the autoclave and the shredder are integrated in one container, completing the sterilisation process and the shredding process, ensuring a clean environment and safe operation. The compact and practical design is ideal for small clinics.
As a result, timely disposal is always possible in hospitals and medical centres, effectively reducing the probability of nosocomial infections occurring and at the same time avoiding contamination by medical waste reintroduced into society.

Dental Waste Disposal Autoclave With Shredder Features:
Dental Waste:
Disposable treatment trays, mouth mirrors, forceps, probes, mouthwash cups, gloves, chest scarves, dental impressions, trays, syringes, needles, cotton balls, cotton swabs, gauze, dental glue, dental paper twists,etc.
Duty Cycle :
Loading→Shredding→Vacuum Purging (over 99% Air Expulsion)→Sterilization→Exhaust Drying Cycle→Unloading

Advantages
1. shredding and sterilisation all in one container, a closed environment for greater safety
2. 80% reduction in volume of shredded waste for better sterilisation results.
3. The treatment process achieves reduction, harmlessness and resource utilization.
4. Compact design that can serve any hospital, clinic or laboratory.

Features:
1. Dual shaft low speed high torque drive is used. Medical waste is shredded under the combined action of cutting, squeezing and shredding by the blades mounted on the shafts.
2. The pulsating method forces the removal of cold air from the sterilisation chamber, so that the sterilisation of medical waste is complete.
3. PLC + HMI control system to display the working process and parameters such as temperature, pressure, time, etc. Special configurations and manual operations are also available to the user as required.
4. Equipped with sterilization air filter to eliminate air pollution during exhaust.
5. Equipped with a micro-printer to print out the working process parameters for archiving and reference purposes.
Leave a Reply