Does the autoclave steam steriliser prevent the spread of disease?


In short, yes! Autoclave is used to sterilize medical equipment and tools to kill or neutralize infectious and hazardous substances.

Autoclaves prevent the spread of disease by:

1.Purification of infectious biological waste

2.Neutralizing genetically modified organisms or gmos

3.Sterilize medical equipment and other items to kill bacteria, bacteria, viruses, and other harmful and infectious substances.

4.The other.

Steam sterilization for Hospitals depends on the following factors:

Autoclave sterilization temperature:

Autoclave needs to run between 115° and 143° to be effective at 15 psi. Temperature plays an important role in the destruction of harmful infectious microbial life.

Autoclave sterilization time:

Autoclave time depends on the type of item to be sterilized. The time required to autoclave can range from a few minutes to an hour or more. The time spent in an autoclave at the right temperature is key to neutralizing any disease-causing microbes.


For this process to be effective, an adequate steam supply or moisture is needed. Vapor saturation is critical for efficient temperature transfer. Water is often added to increase moisture and aid in temperature transfer.


Pressurized steam must come into contact with the item to be disinfected. Steam must be in contact with all areas and surfaces of items in the autoclave.

What makes Steam sterilizers effective and reliable for Hospitals?

Autoclave sterilization The use of autoclave sterilized medical tools to kill bacteria, fungi, spores, viruses and other disease-carrying microorganism,

such as:

1. A scalpel

2. Pliers

3. Scissors

4. Other metal and glass products

In order for autoclave to be effective, procedures, guidelines and safety procedures must be followed; otherwise, the process will be considered a failure.

Any violation of security protocols and procedures, no matter how small, will disrupt the entire process. The safety of patients and medical staff depends on the sanitary condition of medical equipment.

Important note:

1. When transporting waste or medical items for autoclaving, they must be sealed in leak-proof containers and handled properly only by authorized personnel.

2. When handling items and pressure steam sterilizers, laboratory coats, waterproof and heat-resistant gloves, and other personal protective equipment required for the procedure must be worn at all times. PPE should follow industry standards.

3. Do not autoclave items with trace radioactive materials, items containing trace solvents, volatile chemicals, or corrosive agents.

4. Do not handle any autoclave items. Let the professionals deal with them.

5. Keep away from autoclave and autoclave room.

Autoclave is environmentally friendly

Autoclave uses temperature and moisture, mostly from water. It does this without using any chemicals or reagents. This is an environmentally safe procedure.

Moreover, it is safe, healthy and environmentally friendly because it can reuse medical equipment and supplies and purify medical waste and biohazard materials before disposal.


Leave a Reply

Your email address will not be published. Required fields are marked *