Medical Sterilizer Ampoule Plastic Bottle Steam Leak Test Sterilizer Description:
The medical sterilizer has been widely used in injectors that can terminal sterilization because of its good heat resistance and sterilization at 121℃, as well as its higher transparency and strength.The pharma sterilizer uses pressure steam as sterilizing medium and can achieve uniform sterilization in the temperature range of 105℃ ~ 127℃.

The leak test sterilizer adopts three pulsating vacuum to ensure that the cold air in the sterilization chamber is completely eliminated and heated rapidly and evenly. Effectively eliminate cold air caused by the existence of temperature dead Angle. After sterilizing by sterilizer, vacuum and positive pressure are pumped into color water fo leak test to ensure 100% leakage detection rate.

Ampoule Plastic Bottle Steam Leak Test Sterilizer Pharma Sterilizer Features:
1. Horizontal rectangular structure, high quality acid resistant stainless steel 304 liner, stainless steel drawing board decorative cover.
2. Sealing door adopts pneumatic door.
Door sealing mode pneumatic seal, double door interlock fully meet the requirements of the specification. With manual door, electric door, sliding door and other door structure, with safety self-locking, interlocking device.

3. Control system: optional computer system or PLC+ touch screen system.
F0 value and temperature and time double guarantee sterilization effect, can also use a single parameter control. The system is accurate in temperature measurement and control, stable in operation, and has perfect sterilization record
4. Leak detection method adopts vacuum, color water, positive pressure triple leak detection method, leak detection thoroughly.
5. Can be equipped with automatic in and out of the cabinet system and external circulation automatic transmission line, to achieve loading and unloading bottles, loading and unloading sterilization car, sterilization car transmission, sterilization car in and out of the full automatic cabinet sterilization, improve production efficiency, cost saving.
Leave a Reply