Medical Sharps Waste Shredder Syringe Needle Disposal Description:

Low-speed, high-torque crushers can easily crush the toughest medical-grade materials, from fabrics to glass, plastic and stainless steel instruments. These machines reduce the volume of large autoclave waste destined for landfills by up to 70 percent, leaving all materials in a non-reusable and unrecognizable state.
One of the main reasons biomedical waste spreads infections is the reuse of medically discarded waste. To avoid such infections, autoclave medical waste categories are shredded prior to handling or recycling.

Shredders are usually used in conjunction with autoclaves or incinerators. It can be used in a single institution or in a common treatment and disposal facility. This also reduces the volume of waste and makes transportation easier. The waste for the syringe needle disposal is fed into a hopper that leads to a set of rotating blades/shafts that cut the waste into small pieces. They pass through the net and collect at the bottom. Larger particles retained on the screen pass through the tool again. Slow-moving, high-torque granulators are less likely to require maintenance than high-speed granulators. Medical Waste Shredder axes or blades do not have problems very often as they move slowly and do not undergo wear and tear that needs to be replaced regularly.

The common categories of medical waste disposal sharps that need to be chopped are:
Needles, syringes with fixed needles, needles from needle tip cutter or burner, scalpels, blades, or any other contaminated sharp object that may cause puncture and cuts. This includes both used, discarded and contaminated metal sharps

Medical Sharps Waste Shredder Syringe Needle Disposal Features:
1. Medical waste crusher is designed for crushing medical waste.
2. The blade is made of imported high quality steel with good corrosion resistance. Can handle all kinds of medical waste, such as plastic waste, rags, cotton yarn, medical waste, infectious waste, needles and syringes, etc.
3. In order not to cause splashing pollution in the cutting process, the cutting chamber has multiple seals and power supply devices.

4. The output size of the material is average. Nearly 96% of above 45mm or less than 45mm, can meet the national standard requirements.
5. Medical waste shredding machine has many advantages, notable characteristics are low speed, high torque, low noise, etc.
6. The medical waste disintegrator has two axes and is very efficient in treating biomedical waste into fragments by simply cutting them into pieces. Therefore, it contributes to medical waste management.
7. Due to slow drive, gear box cutters do not need to be sharpened even after years of use.
8. The material can be fed in a 100% safe hopper and the chopped fragments fall into a plastic collection hopper below the cutting room.

Leave a Reply