Lab Substrate Sterilizer Hospital Sterilization Of Microbiological Culture Media Description:
In the process of fermentation, the main reasons for the sterilization of culture medium are as follows: if not sterilized, the substrate or product of biological reaction will be lost due to the consumption of miscellany bacteria, resulting in the decline of production capacity; Metabolites can also be produced by miscellaneous bacteria, which makes the extraction of products more difficult, resulting in lower yield and lower product quality.

After a large number of hybrid bacteria, the PH value of the reaction solution will be changed, so that the reaction is abnormal; Some bacteria will decompose the product, so that the production failure; If the phagocyte contamination occurs, the producing bacteria cells will be lysed and the production will fail.
Substrate sterilizer is to kill the original bacteria in the medium itself or in the air attached to the bacteria, better allow the growth of the target bacteria (reduce the bacteria consumption of nutrients in the medium, and some bacteria will inhibit the growth of your target bacteria).

In general, artificial culture is basically to make it grow as fast as possible or produce metabolites, so let it grow on the sterilization of microbiological culture media to reduce the culture time and improve economic benefits.

Lab Substrate Sterilizer Features:
1. The sterilizer switch is easy and simple, the electronic lock can only be opened when the power is on, to avoid the accidental leakage of unsterilized substances due to power off or shutdown.
2. hospital sterilization can be clear display of the state, such as temperature, pressure, procedures and other relevant information in the process of operation.

3. The biological sterilization pulse air purification is repeated until the pressure is higher than the corresponding temperature and the supersaturated steam pressure is generated to ensure the sterilization effect.
4. The lab sterilizer can adjust the steam emission according to the situation of the sterilized substance, and the hot air filtered by the vacuum pump and the filter membrane can quickly dry the sample, so that it can be used quickly.

5. The mounting hole of the standard compound temperature probe of the high-pressure steam sterilizer is used to select the compound temperature probe to facilitate the verification of the internal sterilization effect.
6. The triple-pulse autoclave steam sterilizer and the pre-vacuum equipment are equipped with a powerful vacuum pump to forcibly empty the air retained in the cavity, so that the saturated steam can penetrate into the sterilized items well, so as to ensure the full and effective sterilization effect.
Leave a Reply