• universal grinder,universal crusher,dust collector
  • universal grinder,universal crusher,dust collector
  • universal grinder,universal crusher,dust collector
  • universal grinder,universal crusher,dust collector

PNMP-S Series Universal Grinder Crusher With Dust Collector

The machine makes use of the relatively high speed operation between the movable tooth plate and the fixed tooth plate, so that the crushed material is crushed by the impact of the tooth plate, friction and the collision between the materials. The crushed material can be discharged directly from the grinding chamber, through the discharge port, the general material after grinding to be collected through the cotton bag, the crushed material is collected in the bag, the air is from the small hole of the bag, will not discharge the fine powder, so as not to waste, no pollution effect. The particle size is determined by replacing the screen with different mesh numbers.

  • Product Description
  • Technical Parameters
  • Video

Universal Grinder Crusher With Dust Collector Description:

The universal grinder consists of charging hopper, stepped gear, crushing knife, toothed ring, crushing motor, discharging port, fan blade, collecting box, dust collecting box and so on. Through the high-speed operation between the moving disc and the fixed disc, the mill can crush the raw materials well. The powder is discharged from the grinding chamber to the output hole and the powder is collected by a bag. The fineness (20 to 150 mesh) depends on the mesh size of the screen, it is very easy to change and adjust the screen.

Universal Grinder Crusher With Dust Collector Features:

1. Strong crushing capacity, low energy consumption, smaller fineness of discharged material.
2. The grinding chamber is equipped with sieve mesh, and the powder particle size can be obtained by changing the sieve mesh size.
3. Built-in centrifugal grading centrifugal system
3. Wear-resistant steel knives with good wear resistance.
4. Closed design, automatic dust collection, no leakage.
5. Wide range of application, can be applied to food, spices, medicine and other substances.

 

universal grinder,universal crusher,dust collector

How to choose blade?

Toothed disc blade is suitable for crushing most of the materials, which is a general-purpose blade.
Hammer blade blade is suitable for crushing materials with high fibre content such as roots, stems, leaves and skins.
Wind impeller for the air-cooled pulverizer is suitable for crushing some materials containing sugar.
Cross hammer type blade is suitable for crushing hard materials.
The turbine type blade is suitable for the crushing of low and medium hardness materials.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Model PNMP-150S PNMP-300S PNMP-800S PNMP-1000S PNMP-1500S PNMP-2000S
Production capacity(kg/h) 60-150 100-300 160-800 200-1000 300-1500 500-2000
Spindle rotation speed(r/min) 5300 4200 3800 3200 3800 2200
Feeding granulrity(mm) 10 10 10 15 15 15
Crushing granulariy(mesh) 20-150 20-120 20-120 20-120 20-120 20-120
Crushing motor(kw) 4 5.5 7.5 18 22 30
Dust removal motor(kw) 0.55 0.55 1.1 1.5 2.2 3
Dimensions(LxWxH) With dust removal 1100x600x1650 1300x700x1850 1350x700x1920 1400x800x2700 1600x900x2300 1800x1200x2500
Single machine 550x500x1200 600x550x1320 650x600x1550 700x650x1680 850x800x1820 950x900x1960