• YG Yak Bone Power Sterilization Of Health Care Products Pharmaceutical Autoclave
  • YG Yak Bone Power Sterilization Of Health Care Products Pharmaceutical Autoclave
  • YG Yak Bone Power Sterilization Of Health Care Products Pharmaceutical Autoclave
  • YG Yak Bone Power Sterilization Of Health Care Products Pharmaceutical Autoclave

YG Yak Bone Power Sterilization Of Health Care Products Pharmaceutical Autoclave

This product is a health care product for prevention and treatment of osteoporosis by combining the Tibetan yak bone with traditional Chinese medicine and adopting the method of high pressure sterilization to kill the microorganisms in meat.

Modern analysis shows that yak bone contains calcium, copper, zinc and other elements, bone collagen peptide and polysaccharide, especially in the four limb bones, the content is significantly high, the absorption rate of calcium can reach more than 90%. The content of its components in promoting bone development and bone healing is higher than that of ordinary herbivorous animals. Therefore, in recent years, studies on making health care products with yak bones have appeared continuously.

 

 

  • Product Description
  • Technical Parameters
  • Video

Yak Bone Power Sterilization Of Health Care Products Pharmaceutical Autoclave Description:

The heating stage is the first stage in the process of high-temperature and autoclaving treatment of yak bone through the introduction of high-temperature circulating hot steam into the interlayer. Pharmaceutical Autoclave will inject steam (about 0.20~0.23MPa) into the water from high temperature and high pressure, and heat the sterilization water until the temperature of the sterilization water finally reaches the preset sterilization temperature. After the pharma heating stage is completed, the sterilization water temperature reaches 121 ℃, and the holding stage will begin. At this stage, the steam will stop and be maintained for a preset time at 121 ° C, ultimately achieving commercial sterility.

sterilization of health care products,pharmaceutical autoclave,pharma sterilization,yak products,steam sterilizer

Steam sterilizer is a sterilizing method of Yak products, ensuring the sterilization thoroughly and ensuring the fiber and quality not being destroyed. After strict inspection, fresh yak bones are refined by strict sterilization and disinfection technology to retain vitamins and collagen in yak bones, bone marrow and tendons to the maximum extent. The sterilization temperature is 100℃ ~ 134℃, the sterilization pressure is 200 ~ 1000Mpa, and the sterilization time is 5 ~ 45min.

The sterilizer relates to a plateau yak placenta health care product and a preparation method thereof.

sterilization of health care products,pharmaceutical autoclave,pharma sterilization,yak products,steam sterilizer

The preparation steps of the health care product are as follows:

Collection of healthy yak bones at altitude cleaning → disinfection and sterilization → bone and meat separation → grinding → grinding → sieving → beige powder

The raw materials obtained by the above steps are made into capsules, infusion and oral liquid.

This product has the health care function of rapidly improving the immune capacity of the body, resisting hypoxia, aging and regulating endocrine.

sterilization of health care products,pharmaceutical autoclave,pharma sterilization,yak products,steam sterilizer

Yak Bone Power Sterilization Of Health Care Products Pharmaceutical Autoclave Features:

1. The main body

Box is rectangular, material is SUS304, X-ray detection. Its design pressure is 0.245Mpa. Suitable for the configuration and requirements of steel pressure vessels. After mechanical and chemical treatment, the surface of the box is bright, beautiful and corrosion resistant.

2. The insulation layer

Made of aluminum silicate, the best insulating material

3. Seal the door

Equipment with single door, optional double door.

Movable ring non-toxic silicone gaskets should be provided as door seals. Automatic control locking switch, sensing door opening and closing, and mechanical safety interlocking device.

sterilization of health care products,pharmaceutical autoclave,pharma sterilization,yak products,steam sterilizer

4. Piping system

The pipeline system consists of control valves, pipelines and filters. Control valve for pneumatic valve, heat resistance, reliable operation, low failure rate, to ensure the overall performance of the sterilizer. Pipe is stainless steel, clamp connection; Easy to install and maintain.

5. Control system

Control system: PLC+HIM+ printer. It can be operated automatically and manually.

6. GMP

GMP confirmation authority fixed, convenient confirmation.

sterilization of health care products,pharmaceutical autoclave,pharma sterilization,yak products,steam sterilizer

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Design pressure Working Pressure Design Temperature Working Temperature Heat Equilibrium Vacuum Steam Source Pressure Water Source Pressure Compressed Air Pressure
0.245Mpa 0.22Mpa 139℃ 134℃ ≤±1℃ -0.095Mpa 0.4-0.6Mpa 0.2-0.3Mpa 0.6-0.8Mpa
Specifications Overall Dimensions Chamber Size Steam Consumption Power Water Consmption Net Weight
Model L*M*H(mm) L*W*H(mm) (kg/cycle) (KW) (kg/cycle) (kg)
Single/Double Door
YG-0.1 825*1080*1600 630*400*480 15 1 80 380
YG-0.25 895*1220*1720 760*600*600 20 1.5 150 650
YG-0.36 1195*1220*1720 1000*600*600 25 1.5 150 760
YG-0.6 1245*1300*1880 1050*680*850 30 2 200 1100
YG-0.8 1595*1300*1880 1400*680*850 35 3 250 1300
YG-1.2 1695*1370*1960 1500*750*1100 40 3 300 1900
YG-2.5 3195*1370*1960 3000*750*1100 75 4.5 450 2800
YG-5.0 3635*1800*2200 3400*1000*1500 150 7.5 600 4500

Video

YG 5.0 Steam Autoclave:

Medical Waste Disposal:

Circular Chamber Construction:

Rectangular Chamber Construction: